Steel Plate Type Outdoor Pre

Basic Info.

Model NO.	YBM 12/0.4
Shell Material	Steel Plate
Shell Protection Grade	IP30
Brand	Kunji
OEM	Offered
Noise Level	≤50dB
Enclosure Temperature Rise Level	10K
Rated Capacity	100 to 2000kVA
Rated Voltage	10 to 35 Kv
Transport Package	Iron Case/Wooden Case
Specification	Customization
Trademark	kunji elctric
Origin	Zhejiang, China
HS Code	8537209000
Production Capacity	50pieces/Month

Product Description

Product Description
Steel Plate Type Outdoor Pre-Installed Substation Grid Substation Mobile Substation

(1) Box shell

European box change box shell with steel structure as the main body, four sides can be used according to different use environment can be composite sandwich plate, stainless steel plate, cold rolled plate, stainless steel plate inlaid anti-corrosion wood, concrete wall, so as to achieve coordination with the environment.

(2) high-voltage chamber

High voltage inlet cabinet, high voltage outlet cabinet, high voltage metering cabinet, PT cabinet, DC screen and other devices are installed in European box transformer high voltage switchgear mainly to XGN15-12 type ring network cabinet and XGN-12 type inflatable cabinet, simple operation, safe use.

(3) Transformer room

European-style box transformer room is equipped with dry type transformer or oil-immersed transformer, temperature controller and high-power fan are installed indoors. The high-voltage end of transformer is connected by cable, the low-voltage end is connected by high-quality copper bar, and the exposed part is wrapped by insulating sleeve.

(4) low-voltage chamber

European-style box transformer low-voltage chamber mainly uses GGD low-voltage switchgear, according to the demand can be configured with low-voltage inlet line, low-voltage metering, low-voltage compensation, low-voltage outlet switchgear, can realize intelligent control, without special guard.

(5) Principle

The principle of European box-type substation is basically the same as that of traditional civil power room. The high-voltage power supply comes in through high-voltage switchgear, goes through transformer step-down, and then distributes electric energy through low-voltage switchgear. Because European box-type substation adopts box shell structure, it can be strong mobility, easy installation, and can be used outdoors.

Technical Parameters

High voltage chamber	Description	Unit	Arguments
	Rated frequency	HZ	50
	Nominal voltage	KV	6 10 35
	Maximum operating voltage	KV	6.9 12 40.5
	Rated current	A	400,630,1250
	Transfer current	A	1200-2000
	Rated short time current	KA	12.5(2s/4s),16(2s/4s),20(2s/4s)
	Rated peak tolerable current	KA	31.5,40,50
	Power frequency withstand voltage - to ground and time/isolation fracture	KV	32/36 42/48 95/118
	Lightning Strike - to ground and time/isolation fracture	KV	60/70 75/85 185/215
	Rated short-circuit breaking current (current limiting fuse)	KA	31.5
	Switch off no-load transformer capacity	KVA	2500
Transformer	Rated capacity	KVA	30-2500
	Tap range	%	±2*2.5%,±5%
	Linkage group		Yyn0,Dyn11
	Impedance voltage	%	4,4.5,6,8
	Nominal voltage	V	220,380,690,800
Low voltage chamber	Rated current of main loop	A	50-4000
	Branch current	A	5-800
	The main circuit is rated to withstand short-time current	KA	15(1s),30(1s),50(1s),65(1s)
	Rated peak tolerable current of main loop	KA	30,63,110
shell	Protection class (conventional products)		IP33
	Noise level	dB	≤50
	Enclosure temperature rise level		10K

WORKING CONDITIONS

1. Altitude: no more than 2000M.

2. Ambient temperature: high temperature: +40ºC; Low temperature: -45ºC : high monthly average temperature: +30ºC : high annual average temperature: +20ºC;

3, installation environment: no explosive, corrosive liquid, gas and dust, installation site without violent shock, allowed in a certain period of time Or run completely submerged in water.

4. Ground acceleration induced by earthquake Ag; The horizontal direction is lower than 3m/s; The vertical direction is lower than 1.5m/s.

5, the waveform of the power supply voltage: approximately sine wave.

6, three-phase power supply symmetry: for three-phase underground transformer, three-phase power supply voltage should be roughly symmetrical.

PRODUCTION DETAILS

Company Profile
Kunji Electric Co., Ltd. which is specialized in producing, developing and marketing power transmission and distribution products. The company is established in 2015, which is located in Wenzhou city, Zhejiang province, China.
Our main products are including switchgear, ring main unit, transformer,substation, and Other Power Transmission & Transformer. Our product has passed ISO9001 and CE certificate.
We have a professional technical team which can provide you with full design solution and technical support.
WorkshopCrertifications

Packaging & Shipping
FAQ
1. Are you a trading company or manufacturer ? We are a professional factory with 10 years experience in the field of High and low Voltage switchgears, Substation,transformers,cable distribution box and various electrical equipment. Our factory is the excellent supplier of State Grid Corporation od China.2. Do you accept customized serveice ? We offer OEM/ODM service , can print your logo on product . our professional technical and quotation team can provice a satisfied satisfied project according to your drawing and parameters .3. What is your MOQ? Our MOQ is 1 piece. 4. How long is your delivery lead time ? It depends on your product requirement and quantity . Generally , 5~10 working days is avaliable .5. How do you solve quality problems? Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make a satisfied soluton within 2 days .6. What is your payment terms ? 30%T/T in adcance,70% before shipment . West union,L/C are also acceptable .